TM 55-2840-254-23
1-89
CHECK FOR STATIC OIL LEAKAGE (Continued)
1-89
7. After one hour, if there is more than 15 seconds
between drops, go to step 9. If there is less than
15 seconds between drops, proceed as follows:
a. Install packing (6) in groove (7) on chip detec-
tor (5).
b. Install chip detector (5) in housing (8).
attachment. Lockwire chip detector (5) to bolt
(9). Use lockwire (E29).
c. Replace output shaft support housing
(Ref. Tasks 2-58 and 2-63).
8. If output shaft support housing is replaced, repeat
steps 6. and 7..
9. Install packing (6) in groove (7) on chip detector
(5).
GO TO NEXT PAGE
