TM 1-2840-252-23-3
8-42
INSPECT DUAL CHIP DETECTOR
8-42
INITIAL SETUP
Personnel Required:
Applicable Configurations:
All
References:
Tools:
Task 1-80
Technical Inspection Tool Kit,
Equipment Condition:
Off Engine Task
Materials:
None
1. Inspect housing (1). There shall be no cracks.
NOTE
Following steps apply to both filters.
2. Inspect filter (2).
a. There shall be no tears, punctures, or broken wires in screen (3).
b. Screen (3) shall not be pushed in or broken away from filter (2).
NOTE
If there is contamination, further inspection of oil system must be done to determine cause. Inspect
contaminated oil system (Ref. Task 1-80).
GO TO NEXT PAGE
8-97