TM 1-2840-252-23-3
8-44
ASSEMBLE DUAL CHIP DETECTOR
8-44
INITIAL SETUP
Parts:
Applicable Configurations:
Packings
All
Personnel Required:
Tools:
Aircraft Powerplant Repairer
Powerplant Mechanic's Tool Kit,
Aircraft Powerplant Inspector
NSN 5180-00-323-4944
References:
Technical Inspection Tool Kit,
TM 1-2840-252-23P
NSN 5180-00-323-5114
Equipment Condition:
Vise
Off Engine Task
Jaw Caps
Materials:
Lockwire (E33)
NOTE
The following step applies to both magnetic chip detectors.
When installing filter on connector, be careful not to push in or deform screen or filter. Pushed in or
deformed screen may cause false chip indications.
1. Install filter (1) on connector (2).
2. Install two packings (3) and magnetic chip detectors (4) in housing (5). Lockwire chip detector (4). Use lockwire
(E33). Use vise with jaw caps.
INSPECT
FOLLOW-ON MAINTENANCE:
Test Dual Chip Detector (Task 8-45).
END OF TASK
8-100
