TM 1-2840-252-23-3
8-45
TEST DUAL CHIP DETECTOR
8-45
INITIAL SETUP
Materials:
Applicable Configurations:
None
All
Personnel Required:
Tools:
Aircraft Powerplant Repairer
Multimeter
Equipment Condition:
Off Engine Task
1. Measure insulation resistance of magnetic chip detectors (1) as follows: Use multimeter.
NOTE
The following steps apply to both magnetic chip detectors.
a. Set multimeter range switch to R x 1000.
b. Touch red probe (2) to pin (3).
c. Touch black probe (4) to threads (5).
d. Meter shall indicate 10 000 ohms, minimum.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
8-101
