TM 55-2840-254-23
1-118
1-118 CLEAN, INSPECT AND REPAIR SPLINES AND GEARS (Continued)
(4) Determine distance between splines
(13) in undamaged area. Use inside
caliper (15).
(5) Measure set thickness on inside caliper
(15). Use outside micrometer caliper.
Record as Dimension D.
(6) Subtract Dimension D from Dimension
C. Result is depth of wear.
(7) Depth of wear shall not exceed dimen-
sion given in detail inspection task.
GO TO NEXT PAGE
1-636
