TM 55-2840-254-23
1-118 CLEAN, INSPECT AND REPAIR SPLINES AND GEARS (Continued)
1-118
(4) Determine thickness of undamaged area
of spline (9). Use outside caliper (11).
(5) Measure set thickness on outside cali-
per (11). Use thickness gage or inside
micrometer caliper. Record as Dimen-
sion B.
(6) Subtract Dimension A from Dimension.
B. Result is depth of wear.
(7) Depth of wear shall not exceed di-
mension given in detail inspection task.
GO TO NEXT PAGE
1-634
