1-118 CLEAN, INSPECT AND REPAIR SPLINES AND GEARS (Continued)
1-118
1. Clean external splines (1), internal splines (2),
and gears (3) as follows:
a. Wear gloves (E20) and remove all traces of
grease and dirt.
Dry cleaning solvent (E17) is flammable
and toxic. It can irritate skin and cause
burns. Use only in well-ventilated area,
away from heat and open flame. In case
of contact, immediately flush skin or
eyes with water for at least 15 minutes.
Get medical attention for eyes.
b. Use dry cleaning solvent (E17) and brush.
When using compressed air for cleaning,
use approved protective equipment for
eyes and face. Do not use more than
30 psig air pressure. Do not direct air
toward yourself or another person.
Failure to comply could result in in-
jury to eyes or skin. In case of injury,
get medical attention.
c. Dry with lint-free cloth (E26), or wearing
goggles, blow dry as needed, with clean, dry
compressed air.
GO TO NEXT PAGE
1-631
