TM 55-2835-209-2
4-7 REPLACE FUEL CONTROL LOWER COVER NUT PLATES (AVIM) (CONT)
Remove rivets (1) from nut plate (2) on
fuel control lower cover (3) with pneu-
matic drill and pin punch.
INSTALLATION
1.
2.
3.
4.
NOTE
Prior to assembly, all compo-
nents will be visually in-
spected for damage.
Clean all surfaces to be assembled,
using 1,1,1-trichloroethane (D41)
acid brush (D5) and machinery towel
(D20).
Apply a wet coat of epoxy primer
(D30) to grip area of rivets and
holes on replacement nut plate. Air
dry for 3 minutes.
Align rivet holes in nut plate (2)
and fuel control lower cover (3) and
install rivets (l).
Coat head and tail of rivets (1)
with wet coat of epoxy primer-(D30).
FOLLOW-ON MAINTENANCE: None.
4-21