TM 55-2835-209-23
4-9 INSTALL FUEL CONTROL LOWER COVER (CONT)
2. Apply antiseize compound (D8) to
bolts (10) threads.
3. Apply a uniform layer of RTV (D31)
on grommet (7).
Install fuel mani-
fold assembly to fuel solenoid valve
tube (6) and-grommet (7) in fuel
control lower cover (8).
4.
5.
Apply a uniform layer of RTV (D31)
on fuel control lower cover gearbox
assembly mounting surface.
Install
fuel control lower cover (8) on
gearbox assembly and align bolt
holes.
Secure with bolts (10) and
washers (9).
Torque bolts to 38 to
42 inch-pounds.
Install fuel manifold assembly to
fuel solenoid valve tube (6) on fuel
solenoid valve.
Torque tube to 70
to 80 inch-pounds.
6.
Lubricate packing (11) with lubri-
cating oil (016) and install on fuel
control assembly (12) mount flange.
Use care when installing fuel
control onto adapter.
Be sure
fuel control shaft and coupler
splines are aligned.
Failure
to do so could result in dam-
age to fuel control and/or
shaft coupling.
7.
Install fuel control assembly (12)
and push aft to align and engage
fuel control assembly splines with
coupler.
8.
Install coupling (13). Align fuel
control assembly with fuel filter
assembly at 9 o’clock position.
Torque coupling to 33 to 37 inch-
pounds.
9.
Tap coupling (13) outer diameter
with rubber-mallet. Torque coupling
clamp to 47 to 53 inch-pounds.
4-26
Change 1
10.
Repeat tap and torque until torque
remains at 47 to 53 inch-pounds.
