TM 55-2835-208-23
2-80 INSPECT ENGINE ELECTRICAL HARNESS ASSEMBLY (Continued)
2-80
5.
Inspect
wires and sleeving (2)
for cuts, breaks or deteriora-
tion.
If damaged, replace
harness assembly (Tasks 2-81,
2-82, or 2-82.1, 2-82.2).
6.
Remove connectors (1). In-
spect connectors (1) for broken
or bent pins
and crossed or
stripped
threads. If damaged,
replace (Tasks 2-81, 2-82, or
2-82.1, 2-82.2).
7.
Inspect wires and sleeving (3)
for cuts, breaks or deteriora-
tion.
If damaged,
replace
harness assembly (Tasks 2-81,
2-82, or 2-82.1, 2-82.2).
8.
Remove connectors (6) and in-
spect for broken or bent pins.
If
damaged, replace harness
assembly
(Tasks 2-81, 2-82,
or 2-82.1, 2-82.2).
9.
Inspect
thermocouple (4) and
thermocouple
lead
(5)
for
cracked
connector
nut
and
crimped or
broken lead. If
damaged,
replace
harness
assembly
(Tasks 2-81, 2-82,
or 2-82.1, 2-82.2).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
Change 2
2-149
