TM 55-2835-208-23
2-81 REMOVE ENGINE ELECTRICAL HARNESS ASSEMBLY (Continued)
2-81
8.
9.
10.
11.
12.
13.
13.1
14.
15.
16.
17.
18.
Remove nut
(14), bolt (15)
and spacer
(16) to release
clamps (17), (18) and (19).
Disconnect
connector
P305
(20) from start fuel solenoid
valve receptacle J305.
Disconnect
connector
P306
(21) from main fuel solenoid
valve receptacle J306.
Disconnect
connector P307
(22) from max fuel solenoid
valve receptacle J307.
Disconnect
connector
P308
(23) from start by-pass valve
(24).
Remove
screws
(25)
and
washers (26) to disconnect
connector J301 (27).
On APU PN 116305-300 or 116305-302,
disconnect meter assembly texminal lugs by
removing nuts (45.3) and washers (45.2). Re-
move meter assembly (45.1) by removing two
bolts (39) and washers (40).
Disconnect
terminal
board
(43) by removing screws (44),
washers
(45) and nuts (46).
Remove
bracket
(41) by
removing
bolts
(39)
and
washers (40).
Remove nut (28), washer (29)
and
bolt (30) to release
clamp (31).
Remove bolts (32) and washers
(33) to release clamps (34)
and (35).
Remove nuts (36) and bolts
(37) to release clamps (38).
Remove harness assembly (47).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
Change 5
2-151
