ARMY
TM 5-6115-612-34
MARINE CORPS TM 6115-34/8
AIR FORCE
TO 35C2-3-471-2
NAVY
AG-320BO-MME-OOO
3-11.
ENGINE SUPPORT
c.
Ins tallation.
ASSEMBLY. (cont)
(cont)
(2) Place resilient mounts (18)
between engine mounts (22) and engine
supports (19).
Ensure that mounting
holes are alined.
(3) Stack, in
order,
spacers
(17),
resilient mounts (16), ground
strap (15), and washers (14) on engine
mount (22).
Aline mounting holes and
insert capscrews (12).
Place other lug
of ground strap over threaded end of
capscrew.
Secure with washer (14) and
nut (13).
Torque
to 160-190 inch
pounds (18.1-21.5 Nm).
(4) Secure engine spacer (11) and
engine mount plate (10) to bottom of
combustion
chamber
case
with
lock-
washers (9) and capscrews (8).
Torque
to 50-70
(5)
between
engine
mounting
(6)
inch pounds (5.6-7.9 Nm).
Place
resilient
mount
(6)
engine mount plate (10) and
support
(7).
Ensure
that
holes are alined.
Stack, in order, spacer (5),
resilient mount (4), and washer (3) on
engine mount plate (10). Aline mounting
holes and insert capscrew (1). Secure
with
remaining
washer
(3)
and
self-locking
nut
(2).
Torque to
160-190 inch pounds (18.1-21.5 Nm).
(7) Install engine and gearbox,
with generator attached, in accordance
with paragraph 2-7b.
(8) Connect battery cable plug
connector to battery.
3-12. CHASSIS FRAME ASSEMBLY.
a.
Removal.
WARNING
To prevent injury, ensure that
battery is
disconnected before
performing maintenance on elec-
trical components.
(1) Disconnect battery cable plug
connector from battery.
(2) Loosen turnlock fasteners and
remove engine housing access cover.
(3) Remove generator (paragraph
2-6a).
(4) Remove engine and gearbox
(paragraph 2-7a).
(5) Remove power cable from cable
support.
(6) Unlatch and open inlet air
housing access door.
Secure in open
position.
(7) Remove power cable (paragraph
4-81a, TM 5-6115-612-12).
(8) Remove
battery
holddown
(paragraph 4-15a, TM 5-6115-612-12) and
battery.
(9) Remove battery cable (para-
graph 4-26a, TM 5-6115-612-12).
(10) Remove
component
mounting
panel
(paragraph 4-82, TM 5-6115-
612-12).
(11) Unlatch
and
open
fuel
housing access door.
Secure in open
position.
3-14
