ARMY
TM 5-6115-612-12
MARINE CORPS TM 6115-12/7
AIR FORCE
TO 35C2-3-471-1
N A VY
AG-320B0-0MM-000
4-19. BLEED AIR LINE. (cont)
b. Removal.
W A R N I N G
To prevent Injury, ensure that
battery
is disconnected before
performing maintenance.
(1) Disconnect battery cable plug
connector.
(2) Loosen turnlock fasteners and
remove engine housing access cover.
(3) Unscrew bleed air line (3)
from bleed air connector (1) and from
air filter (5).
c.
Installation.
(1) Connect bleed air line (3) to
bleed air connector (1) and tighten
securely.
(2) Connect bleed air line (3) to
air cleaner (5) and tighten securely.
(3) Install engine housing access
cover
and
secure
with
turnlock
fasteners.
4-20. AIR
FILTER.
Maintenance of
the air
filter (1,
figure
4-12)
consists of Inspection.
(1) Open control panel access door.
(2) Ensure that
MASTER SWITCH is
in OFF position.
(3) Close control panel access door.
WARNING
To prevent injury, ensure that
battery is
disconnected before
performing maintenance.
(4) Disconnect battery cable plug
connector from battery.
(5) Loosen turnlock fasteners and
remove engine housing access cover.
(6) Ensure that
air
filter is
securely mounted and that filter is not
damaged.
Report damage to next higher
level of maintenance.
(7) Ensure that bleed air line (2)
is properly secured.
(8) Ensure that louvers of air
inlet housing are free of obstruction.
(9) Install engine housing access
cover
and
secure
with
turnlock
fasteners.
(10) Connect
battery cable plug
connector to battery.
4-21. AIR
FILTER MUFFLER HOUSING.
Maintenance of the air filter muffler
housing (5,
figure 4-12) consists of
inspection, replacement, and repair.
a.
Removal.
Remove screws (3)
and washers (4) that secure air filter
muffler housing (5) to generator set.
The housing is
removed by lifting
straight up.
b. Inspec tion.
Inspect housing
for
damage.
Ensure
that
sound
controlling blanket (6) is securely in
place and undamaged.
4-60
