4-17. ACCESS COVERS. (cont)
ARMY
TM 5-6115-612-12
MARINE CORPS TM 6115-12/7
AIR FORCE
TO 35C2-3-471-1
NAVY
AG-320B0-0MM-000
c.
Engine Electronic Control Module
(b) Install
fuel/oil
drain
(EECM) Access Cover.
access
cover
(4) and secure with
turnlock fasteners.
(1) Removal.
(a) Open control panel access
(c) Remove chocks and release
door.
handbrake.
(b) Loosen turnlock fasteners
and remove EECM access cover (3).
e.
Oil Cooler Housing Access Cover.
(2) Installation.
(1) Removal.
(a) Ensure
that
gasket is
securely in place and undamaged.
(b) Aline EECM access cover (3)
with mounting holes and secure with
turnlock fasteners.
(c) Close control panel access
door.
(a) Remove
screws
(5)
and
washers (6) that secure oil cooler
access cover (7) to generator set.
(b) Remove bolts (8), nuts (9),
washers (10), and standoffs (11) that
connect oil cooler shield (12) to
access cover.
d. Fuel/Oil Drain Access Cover.
(1) Removal.
(2) Installation.
WARNING
To prevent injury, ensure that
handbrake is set and wheels are
chocked
while
working
under
generator set.
(a) Set
handbrake and
chock
both wheels.
(b) On underside of generator
set,
loosen
turnlock fasteners and
remove fuel/oil drain access cover (4).
(2) Installation.
(a) Ensure
that
gasket is
securely in place and undamaged.
(a) Place washers (10) on bolts
(8).
Insert bolts into oil cooler
access cover (7).
(b) Place standoffs (11) on
bolts (8).
(c) Place oil cooler shield
(12) in position on bolts (8). Secure
with remaining washers (10) and nuts
(9).
Torque to 24-36 inch pounds
(2.7-4 Nm).
(d) Secure access cover (7) to
generator
set with washers (6) and
screws (5).
4-57
