TM 1-2840-252-23-3
8-11
INSTALL GAS PRODUCER SPEED PICKUP (Continued)
8-11
(3) Screw in gas producer speed pickup (1) until light drag is felt against feeler gage (6) when moved
in and out of housing adjustment hole (7).
(4) Hold gas producer speed pickup (1) stationary and screw down locknut (2) against housing (3) and
snug tighten locknut.
(5) Check for light drag on feeler gage (6). If gap is incorrect, loosen locknut (2) and repeat steps (2)
thru (5).
(6) Lockwire locknut (2) to housing lockwire hole (8). Use lockwire (E33).
(7) Install cover (5) and three nuts (4).
d. Connect electrical connector (9) to gas producer speed pickup (1).
INSPECT
FOLLOW-ON MAINTENANCE:
None
END OF TASK
8-34
