TM 1-2840-252-23-3
8-9
INSPECT GAS PRODUCER SPEED PICKUP
8-9
INITIAL SETUP
Materials:
Applicable Configurations:
None
All
Personnel Required:
Tools:
Aircraft Powerplant Inspector
Technical Inspection Tool Kit,
Equipment Condition:
NSN 5180-00-323-5114
Off Engine Task
Multimeter
1. Inspect gas producer speed pickup (1) as follows:
a. Inspect body of gas producer speed pickup (1). There shall be no cracks, distortion or damaged threads.
b. Inspect two electrical pins (2). There shall be no broken, corroded or bent pins (2) or damaged insulation (3).
c. Inspect tip (4) of gas producer speed pickup (1). There shall be no broken or worn tips (4) or cracks in
insulation (5).
d. Inspect coil resistance of gas producer speed pickup (1). Use multimeter with function switch set to ohms
and range set to R x 10. Place one lead to pin A and the other lead to pin B. The multimeter should not read less than
98 ohms and not greater than 132 ohms resistance.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
8-30
