TM 55-2840-254-23
6-27
INITIAL SETUP
Materials:
None
Applicable Configurations:
All
Personnel Required:
68B30 Aircraft Powerplant Inspector
Tools:
Technical Inspection Tool Kit,
Equipment Condition:
Off Engine Task
NSN 5180-00-323-5114
1. Inspect start fuel nozzle (1). There shall be no
cracks.
NOTE
Chafing on start fuel nozzle tip may
indicate damage in Iiner boss. Dam-
age in Iiner boss can result in blocked
or restricted spray pattern.
2. Inspect start fuel nozzle air shroud ends (2) as
follows:
a. There shall be no bent shroud ends.
b. There shall be no distorted or burned out
shroud ends.
c. There shalI be no chafing in area 0.25-inch
from bottom of shroud ends.
3. Impact start fuel nozzle internal ball (3) for
freedom of oparation.
a. Shake start fuel nozzle (1) and listen for
rattle.
b. There shall be no stuck ball.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
