TM 55-2840-254-23
6-28 INSTALL START FUEL NOZZLES (Continued)
6-28
In following step, insert nozzles hand
tight to insure that they do not hit
port as needed. Failure to comply
may cause and Ieakage.
1. Install two start fuel nozzles (1 and 2) and lock-
wire. Use Iockwire (E29).
2. Connect primer tube assembly (3) to start fuel
nozzles (1 and 2).
3. Using two wrenches, hold start fuel nozzle (1)
and tighten swivel nut (4).
4. Using two wrenches, hold start fuel nozzle (2)
and tighten swivel nut (5).
INSPECT
GO TO NEXT PAGE
6-117