TM 55-2840-254-23
1-119
1-119 TOUCH UP MAGNESIUM AND MAGNESIUM ALLOYS (Continued)
1. Remove corrosion (1) from damaged area (2).
Use aluminum oxide abrasive paper (E3).
Methyl ethyl ketone (E36) is flammable
and toxic. It can irritate skin and cause
burns. Use only in well-ventilated area,
away from heat and open flame. In case
of contact, immediately flush skin or
eyes with water for at least 15 minutes.
get medical attention for eyes.
Acetone (E1) is flammable and toxic.
It can irritate skin and cause burns.
Use only in well-ventilated area, away
from heat and open flame. In case of
contact, immediately flush skin or
eyes with water for at least 15 min-
utes. Get medical attention for eyes.
2. Wear gloves (E20) and clean damaged area (1).
Use methyl ethyl ketone (E36) followed by
acetone (E1). Use acid swabbing brush (E2)
and lint-free cloth (E26).
3. Let area dry for about 15 minutes.
GO TO NEXT PAGE
1-643
