TM 55-2840-254-23
1-106
WASH COMPRESSOR (WITHOUT WATER WASH KIT P/N 2-200-071-54
1-106
INSTALLED) (Continued)
13.
Prepare compressor wash as
follows:
a. Place empty utility pail (20)
under combustor drain valves
(21).
WARNING
When using compressed air for
cleaning, use approved
protective equipment for eyes
and face. Do not use more than
30 PSIG pressure. Do not direct
air pressure toward yourself or
another person. Failure to
comply could result in injury to
eyes or skin. In case of injury,
get medical attention.
WARNING
Dry cleaning solvent (E17) is
flammable and toxic. It can
irritate skin and cause burns.
Use only in well-ventilated area,
away from heat and open flame.
In case of contact, immediately
flush skin or eyes with water for
at least 15 minutes. Get medical
attention for eyes.
CAUTION
Ensure end of solvent gun is
tight and does not come into
contact with compressor rotor
blades.
CAUTION
Do not spray cleaning solution
into a hot engine, or damage to
engine may occur.
GO TO NEXT PAGE
Change 12
