TM 55-2840-254-23
1-106
1-106 WASH COMPRESSOR (WITHOUT WATER WASH KIT P/N 2-200-071-54
INSTALLED) (Continued)
5. Disconnect hose (1) from adapter (7).
6. Install protective cap (8) on adapter (7).
7. Loosen clamp (9) and remove hose (10) from
tube (11).
8. Loosen clamp (12) and remove hose (13) from
tube (14).
9. Install protective caps (15) on tubes (11 and
14).
10. Adjust air pressure on regulator to 60 psig
maximum to close compressor bleed band.
GO TO NEXT PAGE
1-447
