TM 55-2840-254-23
1-86
1-86 INSPECT CONTAMINATED OIL SYSTEM (Continued)
When installing filter on connector,
be careful not to push in or deform
screen of filter. Pushed in or de-
formed screen may cause false
chip indications.
f.
Install filter (14) on connector (15).
g.
Install packings (13) in grooves (16)
on chip detectors (12).
h.
Install chip detectors (12) in housing
(17). Lockwire chip detectors. Use
lockwire (E29).
15. Service Engine Oil System. (Ref. Task
16. Start and run engine for 5 minutes.
(Ref. TM 55-1520-240-10 or Task
17. Shutdown engine using normal shut-
down procedure. (Ref. TM 55-1520-
246-10 or Task 1-107.)
18. Inspect chip detector, oil filter, and
bearing filters.
a.
If quantity of chips are not signifi-
cantly less, replace defective com-
ponent or engine.
b.
If quantity of chips are significantly
less, return engine to service.
NOTE
If during the above steps chips are
found at the last chance filters, re-
place engine.
INSPECT
FOLLOW-ON MAINTENANCE:
None
END OF TASK
1-272 Change 10
