TM 55-2840-254-23
1-86
1-86 INSPECT CONTAMINATED OIL SYSTEM (Continued)
Dry cleaning solvent (E17) is flammable
and toxic. It can irritate skin and cause
burns. Use only in well-ventilated area,
away from heat and open flame. In case
of contact, immediately flush skin or
eyes with water for at least 15 minutes.
Get medical attention for eyes.
c. Clean plug (8) as follows:
Wear gloves (E20). Immerse plug (8) in
(1)
dry cleaning solvent (E17) and agitate.
Use brush on external surfaces.
Use lint-free cloth (E26) to remove sol-
(2)
vent.
d. Install packing (9) in groove (10) on plug (8).
Plug shall be fully seated and firmly
locked into housing. A loose fitting
plug will cause oil leakage resulting
in engine damage.
e. Install plug (8) in housing (11) by pushing and
turning plug 1/8 turn clockwise.
GO TO NEXT PAGE
1-269
