TM 55-2835-209-23
7-10 INSTALL POWER SECTION ASSEMBLY (AVIM) (CONT)
NOTE
Prior to assembly, all compo-
nents will be visually in-
spected for damage.
1.
Place gearbox assembly on mainte-
nance stand with aft end up.
2.
Lubricate transfer tube packings (1)
with lubricating oil (D16) and in-
stall on transfer tube (2).
3.
Install transfer tube (2) in power
section assembly (4).
4.
Lubricate packing (3) with lubricat-
ing oil (D16).
Install packing on
power section assembly (4).
NOTE
Two persons are required for
following task.
5.
Lift power section assembly (4) in
place being careful to engage trans-
fer tube (2) and carrier assembly.
6.
Apply antiseize compound (D8) to
bolts (7).
Position lifting bracket
(5) and install bolts (7) and wash-
ers (6).
7.
Apply antiseize compound (D8) to
bolts (9).
Install washer (8) and
bolt (9) through remaining wiring
harness clamp bracket. Install
washers (8) and bolts (9).
7-21
