TM 55-2835-209-23
7-2 REPLACE INSERT (AVIM) (CONT)
REMOVAL
1.
Position gearbox housing on work
surface.
2.
Drill insert (1) 0.107 inch from
housing surface to allow extraction.
3.
Remove insert (1) using drive tool
as extractor.
INSTALLATION
1.
2.
3.
4.
5.
6.
NOTE
Prior to assembly, all compo-
nents will be visually in-
spected for damage.
Clean insert (1) and area with
1,1,1-trichloroethane (D41) and ma-
chinery towel (D20).
Apply epoxy primer (D30) with cotton
applicator (D10) to insert (1)
threads.
Allow to cure 1 to 5 min-
utes.
Install insert 0.015 to 0.025 inch
below boss surface.
Swage locking feature of insert.
Remove excess primer with machinery
towel (D20) and dry cleaning solvent
(D35).
Air dry for 72 hours at 62 to 92°F
(17 to 33°C).
FOLLOW-ON MAINTENANCE: None.
7-6
Change 1
