TM 55-2835-209-23
7-1 REMOVE POWER SECTION ASSEMBLY (AVIM) (CONT)
9.
10.
11.
12.
13.
14.
15.
16.
Remove bolts (20) and washers (21)
from lifting bracket (22). Remove
lifting bracket and clamp bracket.
Clean lifting bracket (22) using
process 1, Chapter 8.
Position gearbox assembly (26) in
maintenance stand with aft end up.
NOTE
Removing remaining bolts from
compressor housing will also
remove one wiring clamp.
Remove remaining bolts (23) and
washers (24).
NOTE
Two persons are required for
the following task.
Lift power section assembly (25)_
from gearbox assembly (26) and
place on workbench.
Remove transfer tube (27). Remove
and discard packings (28).
Clean transfer tube (27) using pro-
cess 1, Chapter 8.
Remove and discard packing (29).
FOLLOW-ON MAINTENANCE: None.
7–4
