TM 55-2835-209-23
7-4 REPLACE INSERT (AVIM) (CONT)
REMOVAL
1.
Place gearbox housi
face.
ng on work sur-
2.
Remove loose or damaged insert (1)
with needle nose pliers or equiv-
alent.
INSTALLATION
1.
2.
3.
4.
5.
6.
NOTE
Prior to assembly, all compo-
nents will be visually in-
spected for damage.
Clean insert and area with
1,1,1-trichloroethane (D41) and cot-
ton applicator (D1O).
Apply epoxy primer (D30) to both
surfaces and allow to cure for 1 to
5 minutes.
Install insert (1) one turn below
surface of countersink.
Remove insert (1) tang with hammer
and punch.
Remove excess epoxy primer (D30)
with machinery towel (D20) and dry
cleaning solvent (D35).
Air dry for 72 hours at 62 to 92°F
(17 to 33°C).
FOLLOW-ON MAINTENANCE: None.
7-10
Change 1
