TM 55-2835-209-23
Section VI REPLACE METER BRACKET NUT PLATES
5-6 REPLACE METER BRACKET NUT PLATES (AVIM)
This task covers: a. Removal b. Installation
INITIAL SETUP
Tools:
Aircraft Inspection Tool Kit (T49)
Engine Repairman’s Tool Kit (T47)
Personnel Required:
68B Aircraft Powerplant Inspector
68B Aircraft Powerplant Repairer
68G Airframe Repairman
Materials/Parts:
Acid Brush (D5).
Epoxy Primer (D30)
Machinery Towel (D20)
Nut Plate
Rivet
1,1,1-Trichloroethane (D41)
References:
TM 55-1500-204-25/1
Equipment Conditions:
Meter Bracket Removed From APU
General Safety Instructions:
Compressed air is dangerous
when directed toward yourself
or another person.
The air-
stream or material blown by
the airstream can cause inju-
ry, particularly to the eyes
and face.
Use goggles to pro-
tect eyes and face.
Do not
exceed 30 PSI. Do not direct
airstream toward yourself or
another person.
Power tool operations create
airborne particles.
Eye pro-
tection is required.
Remove
jewelry prior to use.
Ade-
quate ventilation or respira-
tor is required.
Epoxy primer is flammable and
toxic to eyes, skin and res-
piratory tract. To prevent
personnel injury, skin and eye
protection is required. Avoid
prolonged or repeated contact.
Good general ventilation is
normally adequate.
Change 1
5-13
