Section III TOUCH UP ANODIZE FUEL CONTROL UPPER COVER

REPAIR - WELD FUEL CONTROL UPPER COVER CRACKS (AVIM) (CONT)

touch up anodize fuel control upper cover (avim) (cont)

TM-55-2835-209-23 Gas Turbine Engine (Auxiliary Power Unit APU) Model T 62T 40 I Part Numbers 116305-100 and 116305-200 Manual
Page Navigation
80

TM 55-2835-209-23 Section III TOUCH UP ANODIZE FUEL CONTROL UPPER COVER 4-3 TOUCH UP ANODIZE FUEL CONTROL UPPER COVER (AVIM) INITIAL SETUP Tools: tract. Skin and eye pro- Air Blow Gun tection are required. Avoid Air Hose repeated or prolonged contact. Rubber Gloves Work in a well-ventilated Safety Glasses area. Personnel Required: Compressed air is dangerous 68B Aircraft Powerplant Repairer when directed toward yourself or another person. The air- Materials/Parts: Cotton Applicator (D1O) stream or material blown by the airstream can cause inju- I r i d i t e ( D 1 5 ) ry, particularly to the eyes 1,1,1-Trichloroethane (D41) and face. Use goggles to pro- tect eves and face. Do not Equipment Conditions: exceed 30 PSI. Do not direct Fuel Control Cover Remove From airstream toward yourself or APU (Task 4-1) another person. General Safety Instructions: Iridite solution is toxic to skin, eyes and respiratory tract. Skin and eye pro- tection are required. Avoid repeated or prolonged contact. 1,1,1-Trichloroethane is toxic Work in a well-ventilated area. to skin, eyes and respiratory 4-6 Change 1

Privacy Statement
Press Release
Contact