ARMY
T M 5 - 6 1 1 5 - 6 1 2 - 12
M A R I N E C O R P S T M 6 1 1 5 - 1 2 /7
AIR FORCE
T O 3 5 C 2 - 3 - 4 7 1 - 1
NAVY
A G - 3 2 0 B 0 - 0 M M - 0 00
4 - 9 0 .
BRAKE CONTROL. (cont)
b. Adjustment. (cont)
(11) Tighten
jamnut
and
attach
clevis to cable equalizing bar with
straight pin and cotter pin.
Repeat
procedure until wheel no longer
c.
Removal.
WARNING
To prevent injury, ensure
both wheels are chocked
performing
maintenance on
brakes.
(1) Chock both wheels.
(2) On inside of wheel.
moves.
that
while
the
remove
cotter
pins (1,
figure
4-55) and
straight pins (2) that release brake
cables (17) from
on brake.
(3) Remove
capscrews (5),
retaining straps
remote control levers
nuts (3), washers (4),
lockwashers (6), and
(7) to release brake
cables
(17)
from
cable
mounting
brackets (8) and generator set frame.
(4) Remove cotter pin (9) and
straight pin (10) to disconnect clevis
(11) from cable equalizing bar (12).
(5) Remove cotter pins (13) and
straight pins (17) to disconnect brake
cables (17) from cable equalizing bar
(12).
(6) Unscrew
clevis
(15)
and
jamnut (16) from brake cables (17).
4 - 1 62
(7) Unscrew jamnuts (18, 19) to
remove brake rod (20) from clevis (11)
and clevis (21).
(8) Remove cotter pin (22) and
straight pin (23) to remove clevis (21)
from bellcrank (24).
(9) Remove cotter pin
straight pin (26) to free
(24) from bellcrank mounting
(36).
(10) Remove cotter pin
straight pin (28) to remove
(24) from clevis (30).
(22) and
bellcrank
brackets
(27) and
bellcrank
(11) Unscrew
jamnuts
(29) and
clevis (30) to remove those items and
brake rod (31) from handbrake control
lever (32).
(12) Remove nuts (33), washers
(34),
capscrews (35), and bellcrank
mounting brackets (36).
(13) Remove
(38), spacers (39),
washers (41) to
mounting brackets
control lever.
nuts (37), washers
capscrews (40), and
separate
handbrake
(42) from handbrake
d. Repair.
Repair is accomplished
by replacing damaged parts.
e.
Installation.
(1) Aline
mounting holes
brackets (42).
(2) Place
capscrews (40).
position inside
(32) and insert
handbrake control lever
in handbrake mounting
washers
(41) on
Place spacers (39) in
handbrake control lever
capscrews.
