4-87.
CAPACITOR (C4). (cont)
a.
Removal. (cont)
(3) Tag and disconnect electrical
cads (12, 13) from capacitor.
(4) Remove screw (7),
washers
(8),
and self-locking
nut (9) that
secure
capacitor
(10) in mounting
bracket (11).
Remove capacitor.
b.
Installation.
(1) Place
capacitor
(10) in
mounting bracket (11) and secure with
screw (7),
washers (8), and nut (9).
Torque to 74-82 inch pounds (8.4-9.3
Nm).
(2) Connect electrical leads (12,
13) to capacitor. Remove tags.
(3) Install
component
mounting
panel (paragraph 4-82).
4-88.
RESISTOR (R5).
Maintenance of
resistor
R5 (24,
figure
4-52) is
limited to replacement.
A R MY
TM 5-6115-612-12
MARINE CORPS TM 6115-12/7
AIR FORCE
TO 35C2-3-471-1
NAVY
AG-320B0-0MM-000
a.
Removal.
(1) Remove
component
mounting
panel (paragraph 4-82).
(2) Tag and disconnect electrical
leads from resistor.
(3) Remove
screws
(21),
nuts
(22), and lockwashers (23) that secure
resistor (24) to current shunt mounting
bracket (20).
b.
Installation.
(1) Position
resistor (24) on
current shunt mounting bracket (20) and
secure with screws (21), washers (23),
and nuts (22).
Torque to 2-4 inch
pounds (0.2-0.5 Nm).
(2) Connect electrical leads to
resistor.
(3) Install
component
mounting
panel (paragraph 4-82).
4-159
