TM 1-2840-252-23-2
6-30
INITIAL SETUP
Equipment Condition:
Off Engine Task
Applicable Configurations:
All
Tools:
General Safety Instructions:
WARNING
Goggles
Dry, Compressed Air Source
Dry cleaning solvent (E19) IS flammable
Materials:
Dry Cleaning Solvent (El 9)
and toxic. It can irritate skin and cause
Gloves (E24)
burns. Use only in well-ventilated area,
Lint-Free Cloth (E30)
away from heat and open flame. In case
of contact, immediately flush skin or
eyes with water for at least 15 minutes.
Personnel Required:
Get medical attention for eyes.
1. Wear gloves (E24) Clean filter head (1), bracket (2),
and pressure differential switch (3). Use lint-free
cloth (E30) dampened in dry cleaning solvent (El 9).
2. Clean bowl (4). Use dry cleaning solvent (E19) and
brush
WARNING
When using compressed air for cleaning, use
approved protective equipment for eyes and face.
Do not use more than 30 psig air pressure. Do
not direct air toward yourself or another person.
Failure to comply could result in injury to eyes or
skin In case of injury, get medical attention.
3. Wear goggles. Blow dry bowl (4) using clean, dry,
compressed air.
FOLLOW-ON MAINTENANCE
END OF TASK