TM 1-2840-252-23-2
6-31 INSPECT MAIN FUEL FILTER AND BRACKET (Continued)
6-31
b. Using machinist's steel rule (14), push poppet (12)
into housing (13). Poppet (12) should snap back
into housing (13) smoothly with light pressure
applied.
c. Inspect housing (15). There shall be no cracks.
d. Inspect bracket (16). There shall be no looseness If
looseness exists, proceed as follows:
(1) Remove lockwire.
(2) Tighten bolts (17).
(3) Lockwire bolts (17) Use lockwire (E33).
NOTE
inspect contaminated fuel system (Ref Task 1-79).
7.
Inspect filter element (18). There shall be no
FOLLOW-ON MAINTENANCE:
None
END OF TASK
6-113