TM 1-2840-252-23-2
4-40
INSTALL NO. 4 AND 5 BEARING PACKAGE SEALS (AVIM) (Continued)
4-40
Using helper, Install torque multiplier (T50) (83)
5.
as follows
a. Install drive bar (84) and position torque multi-
plier (T63) (83) over drive bar (84)
b. Align two pins (85) with holes (86) in holding
fixture (81 ) Place torque multiplier (T50) (83)
on holding fixture (81)
WARNING
Make sure handle is fully seated and
ratchet selector on torque pack is prop-
erly set before applying torque Rotat-
ing ratchet selector with load on torque
pack can damage unit and injury per-
sonnel If injury occurs, get medical at-
tention.
WARNING
Do not change ratchet selector when
torque load is on torque pack Damage
to equipment or injury to personnel can
result. If injury occurs, get medical at-
tention.
Install handle (87)in torque multiplier (T50) (83)
46.
Turn handle clockwise to torque nut (78) Torque
nut (78) to 475 foot-pounds.
GO TO NEXT PAGE
4-211
