TM 1-2840-252-23-2
4-40
INSTALL NO. 4 AND 5 BEARING PACKAGE SEALS (AVIM) (Continued)
4-40
NOTE
If tip clearance is not within limits, replace
power turbine assembly.
43.
Coat threads of nut (78) with anti-seize com-
pound (E6) Install locking cup (79) and nut (78)
on shaft (21 )
44.
(80) and holding fixture (81) as follows
a. Position wrench (80) on nut (78)
b. Position holding fixture (81) on spine (82)
GO TO NEXT PAGE
4-210
