TM 55-2840-254-23
INSPECT TORQUEMETER HEAD ASSEMBLY
9-13
INITIAL SETUP
Materials:
Applicable Configurations:
Insulation Sleeving Flexite (E24)
All
Personnel Required:
Tools:
68B30 Aircraft Powerplant Inspector
Technical Inspection Tool Kit
NSN 5180-00-323-5114
Equipment Condition:
Off Engine Task
1.
Inspect housing (1). There shall be no cracks.
2.
Inspect potting (2). There is no limit to the
number of cracks; however, there shall be no
more than four full length axial cracks (3).
Cracks shall not be wider than 0.009 inch or less
than 0.150 inch apart. There shall be no loose
or missing material. There shall be no bulges or
warpage. There shall be no rubs on metal poles
(4).
GO TO NEXT PAGE
9-46 Change 6
