TM 55-2840-254-23
8-106 INSPECT OIL LEVEL FLOAT ASSEMBLY (AVIM)
8-106
INITIAL SETUP
Materials:
None
Applicable Configurations:
All
Personnel Required:
Tools:
Technical Inspection Tool Kit,
Equipment Condition:
Off Engine Task
1. Inspect float (1). There shall be no cracks.
2. Inspect hole (2) in float (1). Hole diameter shall
be 0.240 inch maximum.
3. Inspect shaft (3). There shall be no cracks.
4. Inspect notch (4). There shall be no nicks, burrs,
or scratches deeper than 0.020 inch on flat sur-
face (5).
5. Inspect float mounting area (6). Use outside
0.184 inch minimum.
6. Inspect washer (7). Washer (7) shall not be
cracked, loose, or missing.
FOLLOW-ON MAINTENANCE:
None
END OF TASK