TM 55-2840-254-23
8-97
INITIAL SETUP
General Safety Instructions:
Applicable Configurations:
All
Tools:
Powerplant Mechanic's Tool Kit,
Dry cleaning solvent (E17) is flammable
NSN 5180-00-323-4944
and toxic. It can irritate skin and cause
Goggles
burns. Use only in well-ventilated area,
Compressed Air Source
away from heat and open flame. In case
of contact, immediately flush skin or
Materials:
eyes with water for at least 15 minutes.
Dry Cleaning Solvent (E17)
Get medical attention for eyes.
Gloves (E20)
Lint-Free Cloth (E26)
Personnel Required:
68B10 Aircraft Powerplant Repairer
When using compressed air for cleaning,
Equipment Condition:
use approved protective equipment for
Off Engine Task
eyes and face. Do not use more than
Oil Level Indicator Removed
30 psig air pressure. Do not direct air
toward yourself or another person.
Oil Level Indicator Disassembled
Failure to comply could result in in-
jury to eyes or skin. In case of injury,
get medical attention.
1. Wear gloves (E20) and clean housing (1). Use dry
cleaning solvent (E17) and brush.
2. Wipe dry using lint-free cloth (E26).
3. Wear goggles and blow dry internal passage (2).
Use clean, dry compressed air.
GO TO NEXT PAGE
