TM 55-2840-254-23
REPAIR FUEL CONTROL
8-4.1
INITIAL SETUP
Screen Cleaned (Task 8-2)
Applicable Configurations:
General Safety Instructions:
All
Tools:
Powerplant Mechanic's Tool Kit,
NSN 5180-00-323-4944
WARNING
Machine Screw - 8132
Machinist's Scriber
Lubricating oils (E32 and E33) cause paralysis if
swallowed. Prolonged contact with them may irritate the
Materials:
skin. Handle only in well-ventilated areas away from
Wiping Rag (E58)
heat and flame. Drain and store in approved metal
Personnel Required:
safety containers. Avoid prolonged or repeated contact
68B 10 Aircraft Powerplant Repairer
with skin and do not take internally. Wash contacted
Equipment Condition:
areas of skin thoroughly after handling. If irritation of
Off Engine Task
skin results, get medical attention. Get medical attention
Main Oil Pump and Scavenge Oil
for
eyes.
Screen Removed (Task 8-1)
Main Oil Pump and Scavenge Oil
1.
Check that main oil pump (1) turns freely by
turning shaft (2). If shaft (2) does not turn freely,
replace main oil pump (1).
GO TO NEXT PAGE
Change 6 8-20.1
