TM 55-2840-254-23
TASK
TITLE
PAGE
NO.
SECTION
VII
Install Hose Assembly (Main Oil Pump to Dual Chip Detector)
Remove Tube Assembly (Inlet Housing to Main Oil Pump)
Install Tube Assembly (Inlet Housing to Main Oil Pump)
Remove Hose Assembly (Main Oil Pump to Inlet Housing Oil
Scavenge Tee)
Install Hose Assembly (Main Oil Pump to Inlet Housing Oil
Scavenge Tee)
Remove Hose Assembly (Main Oil Pump to No. 4 and 5 Bearing
Scavenge Tube Assembly)
Install Hose Assembly (Main Oil Pump to No. 4 and 5 Bearing
Scavenge Tube Assembly)
Remove Tube Assembly (No. 4 and 5 Bearing Scavenge Con-
nector to Hose Assembly)
Install Tube Assembly (No. 4 and 5 Bearing Scavenge Con-
nector to Hose Assembly)
Remove Hose Assembly (Pressure Connector to No. 4 and 5
Bearing Filter)
Install Hose Assembly (Pressure Connector to No. 4 and 5
Bearing Filter)
Remove Hose Assembly (Inlet Housing to Oil Scavenge Tee)
Install Hose Assembly (Inlet Housing to Oil Scavenge Tee)
Remove Hose Assembly (Inlet Housing to Oil Drain Cock)
Install Hose Assembly (Inlet Housing to Oil Drain Cock)
Remove Hose Assembly (Oil Filler to Starter Drive)
Install Hose Assembly (Oil Filler to Starter Drive)
Remove Hose Assembly (Starter Drive to Tube and Hose
Assembly)
Install Hose Assembly (Starter Drive to Tube and Hose
Assembly)
Remove Tube and Hose Assembly (Accessory Gearbox Collector
to Tube Assembly)
Install Tube and Hose Assembly (Accessory Gearbox ColIector
to Tube Assembly)
Remove Tube Assembly (Tube and Hose Assembly to Accessory
Gearbox Assembly)
Install Tube Assembly (Tube and Hose Assembly to Accessory
Gearbox Assembly)
Vlll
STARTER GEARBOX FILTER MAINTENANCE PROCEDURES
Remove Starter Gearbox Filter
Clean Starter Gearbox Filter
Inspect Starter Gearbox Filter
Install Starter Gearbox Filter
8-3
