TM 55-2840-254-23
Section IV. FUEL BOOST PUMP ASSEMBLY - PREPARATION FOR STORAGE OR SHIPMENT
6-14 PRESERVE FUEL BOOST
PUMP ASSEMBLY
6-14
INITIAL SETUP
Materials:
Lubricating Oil (E31)
High Pressure Plugs
Applicable Configurations:
All
Personnel Requited:
Tools:
Equipment Condition:
Off Engine Task
1. Install high pressure plugs (1) in ports (2 and 3)
on fuel boost pump assembly (4).
2. Pour lubricating oil (E31) in port (5) until port
(5) is filled.
3. Install high pressure plug (1) in port (5).
4. Rotate fuel boost pump spline (6) counterclock-
wise by hand at least three revolutions.
5. Remove high pressure plugs (1) and refill port
(5) with Iubricating oil (E31).
6. Install high pressure plugs (1) in port (5).
FOLLOW-ON MAINTENANCE:
END OF TASK