TM 55-2840-254-23
1-98 SERVICE NO. 4 AND 5 BEARING OIL FILTER (Continued)
1-98
In following step, be sure that filter is
installed in reducer with small diameter
hole facing up. Failure to comply will
cause less oil flow to bearings and re-
sult in bearing failure.
17. Install No. 4 and 5 bearing filter (9) into re-
ducer (7).
18. Install spring (8).
In following step, hold No. 4 and 5 bear-
ing lube adapter using open-end wrench
(T53). Failure to use wrench may result
in damage and dislocation of oiI transfer
tube resulting in oil Ieaks.
19. Place open-end wrench (T53) (4) on No. 4 and
5 bearing lube adapter (5).
20. Install hose assembly (6) on reducer (7).
GO TO NEXT PAGE
1-395
