1-25
1-25 INSPECT PRESSURIZED SHIPPING AND STORAGE CONTAINER (Continued)
NOTE
In following step, presence of air bub-
bles indicates a leak.
7. Inspect for leaks by applying liquid soap (E27)
to valve (5) and valve stem (6).
8. If leak exists at valve stem (6), replace valve
stem (6) as follows:
Shipping container is pressurized. Use
care during removal of valve stare. In-
jury to personnel can result. If injury
occurs, get medical attention.
a. Remove valve stem (6) from valve (5). Use
slotted end of valve cap (4).
b. Install serviceable valve stem (6) in valve (5).
Use slotted end of valve cap (4).
9. If leaks exist at valve (5), replace valve (5) as
follows:
a. Remove valve (5).
b. Install serviceable valve (5).
GO TO NEXT PAGE
1-49
