TM 55-2835-209-23
Section XI REPLACE INSERT
3-11 REPLACE INSERT (AVIM)
This task covers: a. Removal b. Installation
INITIAL SETUP
Tools:
Epoxy primer is flammable and
Aircraft Inspection Tool Kit (T49)
toxic to eyes, skin and res-
Engine Repairman’s Tool Kit (T47)
piratory tract. To prevent
personnel injury, skin and eye
Personnel Required:
protection is required. Avoid
44E Machinist
prolonged or repeated contact.
68B Aircraft Powerplant Inspector
Work in a well-ventilated
68B Aircraft Powerplant Repairer
area.
Materials/Parts:
Cotton Applicator (D10)
Epoxy Primer (D30)
Insert
1,1,1-Trichloroethane (D41)
References:
TM 55-1500-204-25/1
Equipment Conditions:
Combustor Case Removed From APU
General Safety Instructions:
Heated components can pose a
serious burn potential.
Wear
insulated mittens when handl-
ing heated components.
1,1,1-Trichloroethane is toxic
to skin, eyes and respiratory
tract.
Skin and eye pro-
tection are required.
Avoid
repeated or prolonged contact.
Work in a well-ventilated
area.
Compressed air is dangerous
when directed toward yourself
or another person.
The air-
stream or material blown by
the airstream can cause inju-
ry, particularly to the eyes
and face.
Use goggles to pro-
tect eyes and face.
Do not
exceed 30 PSI. Do not direct
airstream toward yourself or
another person.
3-23
