TM 55-2835-209-23
Section IX REPLACE COMBUSTOR CASE NUT PLATES
3-9 REPLACE COMBUSTOR CASE NUT PLATES (AVIM)
This task covers: a. Removal b. Installation
INITIAL SETUP
Tools:
Aircraft Inspection Tool Kit (T49)
Engine Repairman’s Tool Kit (T47)
Personnel Required:
68B Aircraft Powerplant Inspector
68B Aircraft Powerplant Repairer
Materials/Parts:
Acid Brush (D5)
Blind Rivet
Epoxy Primer (D30)
Machinery Towel (D20)
Nut Plate
1,1,1-Trichloroethane (D41)
References:
Task 3-9
TM 55-1500-204-25/1
Equipment Conditions:
Combustor Case Removed From APU
General Safety Instructions:
Compressed air is dangerous
when directed toward yourself
or another person.
The air-
stream or material blown by
the airstream can cause inju-
ry, particularly to the eyes
and face.
Use goggles to pro-
tect eyes and face.
Do not
exceed 30 PSI. Do not direct
airstream toward yourself or
another person.
Epoxy primer is flammable and
toxic to eyes, skin and res-
piratory tract. To prevent
personnel injury, skin and eye
protection is required. Avoid
prolonged or repeated contact.
Good general ventilation is
normally adequate.
Power tool operations create
airborne particles.
Eye pro-
tection is required.
Remove
jewelry prior to use.
Ade-
quate ventilation or respira-
tor is required.
1,1,1-Trichloroethane is toxic
to skin, eyes and respiratory
tract.
Skin and eye pro-
tection are required.
Avoid
repeated or prolonged contact.
Work in a well-ventilated
area.
Change 1
3-19
