TM 55-2835-209-23
7-14 REPLACE SEAL ASSEMBLY (AVIM) (CONT)
10.
11.
12.
13.
14.
Install adapter assembly (9), por-
tion of adapter kit (T6) into
spline adapter of starter gearshaft
assembly to stop rotation of gear-
box gears while round nut (10) is
being installed. Secure adapter
assembly (9) to studs using
MS21043-3 or equivalent nuts.
Install new nut locking key (11)
onto slot of output shaft previous-
ly marked on disassembly and then
install round nut (10) onto output
shaft.
Using nut torque adapter (12),
torque round nut (10) to 100 to 200
inch-pounds.
Bend nut locking key (11) into tang
of round nut (10). Cut and remove
any portion of nut locking key (11)
protruding from round nut (10) di-
ameter.
Remove adapter assembly (9) from
starter gearshaft assembly.
FOLLOW-ON MAINTENANCE: None.
7-32
Change 1
