TM 55-2835-209-23
6-15 REMOVE AND INSTALL OIL FILL CAP (CONT)
REMOVAL
1.
Rotate oil fill cap (1) counter-
clockwise until dislodged from oil
fill neck (2).
2.
Remove oil fill cap (1), with dip-
stick from oil fill neck (2).
3.
Clean oil
esses 1,
fill cap (1) using proc-
2 and 3, Chapter 8.
INSTALLATION
NOTE
Prior to assembly, components
will be visually inspected for
damage.
1.
Install oil fill cap (1) with dip-
stick in oil fill neck (2).
2. Align notches, then rotate oil fill
cap clockwise until snug.
FOLLOW-ON MAINTENANCE:
Subsequently,
check oil level using the oil fill cap
dipstick.
Change 1
6-24.1/(6-24.2 blank)
