TM 55-2835-209-23
6-8 REPLACE PIN (AVIM) (CONT)
REMOVAL
Remove pin (1) from rotor housing.
INSTALLATION
1.
2.
3.
4.
NOTE
Prior to assembly, all compo-
nents will be visually in-
spected for damage.
Clean hole and pin (1)with 1,1,1-
trichloroethane (D41) and machinery
towel (D20).
Apply a thin coat of epoxy primer
(D29) to hole and pin (1) using a
cotton applicator (D1O).
Install pin (1) to a depth that will
leave 0.06 to 0.08 inch exposed. Do
not include the counterbore of the
hole in the pin measurement. Meas-
ure pin with micrometer.
Clean excess epoxy primer (D29) from
pin (1) and rotor housing.
FOLLOW-ON MAINTENANCE: None.
6-11
