TM 55-2835-209-23
4-18 REPLACE FUEL MANIFOLD ASSEMBLY (AVIM) (CONT)
REMOVAL
To prevent clogging or contam-
ination, all exposed openings
in fuel, oil, air lines and
electrical connectors will be
capped immediately.
Be sure
caps and plugs are clean.
1.
Place machinery towel (D20) under
combustion case before disconnecting
fuel manifold assembly (2).
2. Disconnect fuel solenoid valve to
fuel manifold assembly tube (1) from
fuel manifold assembly (2) valve
housing.
3.
Disconnect fuel manifold assembly
(2) from fuel nozzle assemblies (7).
4.
Remove bolts (3, 4), bracket (5) and
spacer (6).
Discard bolts.
5.
Remove fuel manifold assembly (2).
6.
Clean manifold assembly (2) using
process 1, Chapter 8.
4-50
