TM 55-2835-209-2:
4-18 REPLACE FUEL MANIFOLD ASSEMBLY
INSTALLATION
tubes
NOTE
and connectors are
installed and connected, pro-
tective caps and plugs shall
be removed.
Prior to assembly, components
will be visually inspected for
obvious damage.
1.
Apply
compound (D7) to
threads of bolts (2, 3).
2.
Place fuel manifold assembly (1) on
case.
3.
Be sure bolt with
hole is
positioned on right side of fuel
manifold assembly valve housing,
then secure fuel manifold assembly
housing with bolts (2, 3),
spacer (4) and bracket (5). Torque
bolts to 38 to 42 inch-pounds.
bolt (2) to fuel check
valve with
4.
Connect fuel manifold assembly (1)
to fuel nozzle assemblies (6).
Torque fuel manifold assembly (1) to
33 to 37 inch-pounds.
5.
Connect fuel solenoid to fuel mani-
fold assembly tube (7) to fuel mani-
fold assembly.
Torque to 66 to 74
inch-pounds.
6.
Remove machinery towel
FOLLOW-ON MAINTENANCE: None.
4-51
